Ultimate Electrical Machines for Electrical Engineering




Ultimate Electrical Machines for Electrical Engineering

"Ultimate Electrical Machines  Course Bundle for Complete Beginners"


The only course bundle out there with everything you need to know about DC machines, induction machines, transformers, magnetic circuits, synchronous machines, and generators



First Course "Complete DC Machines Course for Electrical Engineering"


Throughout the course you will learn:

  • Importance and construction of DC machines.

  • Armature winding and emf equation.

  • Separately excited DC machine.

  • Shunt and series DC machines.

  • Types and applications of compound DC motors.

  • Torque-speed characteristics and speed control of separately excited DC motor.

  • Torque-speed characteristics of series DC motor.

  • Starting of DC machine.

  • Armature reaction in DC machines.

  • Losses in DC machines.

  • Dozens of solved examples on all types of DC machines.


All of these topics are in a step by step lessons with many solved examples.



Second Course "Complete Magnetic Circuits and Transformers Course for Electrical Engineering"


Throughout the course you will learn:

  • Importance of the magnetic circuit and its application like a transformer.

  • Difference between linear and non-linear materials.

  • Important definitions of magnetic circuits, flux linkage, and reluctance.

  • The analogy between the magnetic and electric circuits, the similarity between them like resistance, reluctance, conductivity, permeability, EMF, MMF, current, flux, magnetic flux density, and current density.

  • Induced EMF, fringing effect, and ampere right-hand rule or screw rule.

  • Importance of transformers and why it is considered as the backbone of the power system.

  • Iron Core is responsible for the magnetic flux action.

  • Magnetic circuit which is represented by the iron core.

  • Windings of transformer, types, categories, and construction.

  • Insulating Material between the windings and iron core + Transformer Oil and its great importance.

  • Conservator of the transformer which contains oil and its function.

  • Breather is used as a filter in a Transformer.

  • Bushings which is important for human safety and protection from instant death.

  • Tap Changer is used to control the voltage according to the load variations.

  • Cooling Tubes for transformer oil cooling and heat dissipation.

  • Buchholz Relay in transformer for gas detection.

  • Explosion Vents for protection of the transformer in case of internal faults.

  • Different Methods of Cooling of Transformers and their corresponding power Rating.

  • Different types of transformers as Power and Distribution Transformers.

  • Difference between Single Phase Core and Shell Type Transformers.

  • Difference between Three Phase Core and Shell Type Transformers.

  • Comparison between the Shell Type and Core Type Transformers.

  • Theory of Operation of Transformer.

  • Effect of Loading on the Transformer.

  • Transformer Regulation and Efficiency.

  • Different Losses occurring in Transformer.

  • Transformer Rating.

  • Voltage relation in the transformer.

  • Approximate and Exact Equivalent Circuits of the transformer.

  • Concept of Referring in Transformer.


All of these topics are in a step by step lessons with many solved examples.



Third Course "Complete Synchronous Machines Course for Electrical Engineering"


Throughout the course you will learn:


  • Construction and principle of operation of synchronous generator.

  • Principle of operation of synchronous motor.

  • Equivalent circuit and phasor diagram of non-salient synchronous machine.

  • Equivalent circuit and phasor diagram of salient synchronous machine.

  • Parallel operation of two generators.

  • Synchronization of the machine with the grid.

  • Dozens of solved examples on synchronous machines salient and non-salient.


All of these topics are in a step by step lessons with many solved examples.



Fourth Course "Complete Induction Machines Course for Electrical Engineering"


Throughout the course you will learn:


  • Construction and theory of operation of induction machines.

  • Equivalent circuit and power flow in the induction motor.

  • Torque-speed characteristics of induction motor.

  • Methods of speed control of induction motor.

  • Methods of starting induction motor.

  • Principle of operation of doubly fed induction generator.

  • Self-excited induction generator.

  • Dozens of solved examples on induction machines.


All of these topics are in a step by step lessons with many solved examples.


Fifth Course "DC Machine, Induction Machine, and Synchronous Generator Simulations"


Throughout the course you will learn:

  • Modeling of the DC machine in a no-load case using Simulink in MATLAB.

  • Modeling of the DC machine in the presence of load torque using Simulink in MATLAB.

  • Simulating the DC machine using a power library from Simulink in MATLAB.

  • Simulation of induction motor using Simulink in MATLAB.

  • Simulation of the synchronous machine connected to a small power system.

  • Everything about the ETAP program from zero to hero.


All of these topics are in a step by step lessons with many solved examples.


Sixth Course "Ultimate Logixpro PLC Simulator Course for Electrical Engineering"


The only course out there which can teach you the basics of PLC programming with fun and awesome simulations

Logixpro program is an interesting and useful simulator for the simulation of different procedures such as moving belts, garage openings, and closing, a mixer that consists of a tank in addition to some pipes of different liquids, and many more!

This program helps learn ladder programming and PLC with an easy and interactive simulation method.

In this course, we will use the Logixpro simulator in which we will write the coding and simulate inside the program to see the effect of our ladder diagram.


Throughout the course, you will:


  • Understand PLC hardware configuration.

  • Understand the types of inputs and outputs in PLC.

  • Understand the advantages of using PLC over classic control.

  • Differentiate between PLC programming languages.

  • Learn the definition of the PLC scan cycle.

  • How to use markers in PLC.

  • How to use counters and timers.

  • Do tasks in silo, batch, I/O, and door simulators.


Take this bundle if you've been looking for ONE COURSE BUNDLE with in-depth insight into the basics of electrical machines, ETAP, and PLC.

Learn about different electrical machines such as DC, synchronous, and induction machines without any previous knowledge

Url: View Details

What you will learn
  • Understand the importance of transformers
  • Understand why are the transformers considered the backbone of Power System
  • Understand the importance of iron core

Rating: 4.4375

Level: All Levels

Duration: 29.5 hours

Instructor: Ahmed Mahdy / Khadija Academy


Courses By:   0-9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 

About US

The display of third-party trademarks and trade names on this site does not necessarily indicate any affiliation or endorsement of hugecourses.com.


© 2021 hugecourses.com. All rights reserved.
View Sitemap