Obstacle Avoiding Robot with Raspberry Pi

Obstacle Avoiding Robot with Raspberry Pi

The Logic of Obstacle Avoiding Robot As technology continues to evolve so does the need for creativity in the construction of new and more advanced robots. One such example is an obstacle-avoiding robot with Raspberry Pi. The purpose of this project is to construct a robot that avoids obstacles and follows a set path, and the results were quite successful.

The opportunity for creativity with this Raspberry Pi course is infinite. With total freedom to choose your own path in creating your very own custom-designed Obstacle Avoiding Robot you will have so much fun whilst learning about electronics, programming, computer science, and innovation.

Raspberry Pi has been programmed with a variety of sensors. The sensors include a Basic Sensor Kit from Sparkfun and a Servo HAT from Adafruit Industries. For obstacle avoidance purposes, a varied configuration is necessary for objects in the environment to be able to be avoided. The Raspberry Pi has been equipped with infrared LEDs, an infrared receiver, and an ultrasonic sensor.

It is a small and affordable computer that, when combined with the right accessories, can be used to create an obstacle-avoiding robot.

Why you should take this course?

• The course is designed for beginners

• This Raspberry Pi course teaches you how to program your own obstacle avoiding robot using the Raspberry Pi

• The course is designed for beginners

• Helps you to create amazing applications such as fire fighting and remote control

• Learn robotics programming.

• You can make this robot for all occasions like teaching children about safety at the park or creating a robot pet for kids.

• The course will teach you how to design your own circuits for your robots by using an Arduino, which is an open-source electronics prototyping platform.

• You will be able to build working projects that are fun and educational

>>> Continues Updates <<<

More Than 700 STUDENTS!!! THANK YOU!!!

What students are saying:

• Sam Ander says, "Thanks, good information"

Welcome to this course.

This Course will teach you how to Make your own Obstacle Avoiding Robot and start making amazing application such as fire fighting and remote control, This Guide will take you in a step by step manner to know what each component inside this circuit is, and what it does and how to wire it up, starting with the Ultrasonic Sensor, IR Sensor, Motor Driver and ending with resistors.

You will know what is the actual working principle of Ultrasonic Sensor and IR Sensor and how to interface and configure them correctly so that you can detect objects in the surrounding with your Raspberry Pi Powered device easily and effectively.

After this course you will be able to make your own Obstacle Avoiding Robot with Raspberry Pi and the choice is yours to use it in any application that comes in your mind and can make your life easier, since all connections are explained in details.

Goal From This Course:

- Connect Arduino Ethernet Shield to Arduino Board with all necessary Components and make it Internet Based.

What you will learn in this Course

- How to Connect Motor Driver Module to Raspberry Pi.

- How to Connect Ultrasonic and IR Sensors to Raspberry Pi.

- How to Detect the presence of objects and take Actions Using Raspberry Pi.

- How Ultrasonic and IR Sensors Actually Works.

- How to interface different type of electronic elements with Raspberry Pi.

- How Raspberry Pi Can make your life easier.

- How Program, burn a code and wire Raspberry Pi and different Modules.

- What are the right tools that you need to start making amazing projects.

- Why using Control with Raspberry Pi is better than traditional Control Methods.

Make your own Obstacle Avoiding Robot and start making amazing application such as fire fighting and remote control

Url: View Details

What you will learn

• Make your own Obstacle Avoiding Robot with Raspberry Pi
• Interface Ultrasonic Sensors with Raspberry Pi
• Interface IR Sensors with Raspberry Pi

Rating: 3.4

Level: All Levels

Duration: 1 hour

Instructor: Educational Engineering Team