GD&T + ISO GPS Full Learning Bootcamp - From Rookies To Star




GD&T + ISO GPS Full Learning Bootcamp - From Rookies To Star

GD&T is the international language to describe the function of the parts, this language should precisely and uniquely specify the function of the parts as well as the feasibility of manufacturing and measurement.

This course is designed to help either beginners or intermediate GD&T users to reach the experienced level. The whole course has 60 modules, which is designed from fundamental level to advanced level. Each module is targeted to dive into each GD&T and GPS knowledge in detail and in depth by using practical drawing cases. Then all of this points will be linked together to build the systematic knowledge of GD&T/ISO GPS frame structure. We believe the philosophy, logic and relationship behind those various symbols is the key to make the learner to grasp the core understanding on GD&T/ISO GPS. Just understanding the definition of geometric tolerance is not enough, we will explore the meaning of each geometric symbol from the angle of relationship, application and function, such as common and difference of each tolerance, how to define the datum based on the function, how to define the tolerance based on the function, how to evaluate the parts, how to design the function gage to verify the parts. The training includes 12 work-shop quizzes to help the students improve practical application skills, we have provide final test to verify the learning effectiveness. Bonus GD&T & GPS videos will be offered to improve the understanding the specific knowledge point. Long term question and answer service will be provided for free.

This course mainly focus on ASME Y14.5-2018 and the key ISO GPS 1101/8015/5458/5459 contents are included. All of the teaching contend will be based on the latest GD&T and ISO GPS standard. Total 54 modules are developed as below:


Introduction

1. Introduction


Chapter 1

GD&T  Principles and Rules

2. GD&T and ISO GPS Systems  and Fundamental Rules

3. Datum and Datum Selection

4. Feature Control Frame,  Tolerance Zone and TED

5. Linear tolerance to define position

6 .Profile tolerance and Linear Tolerance

7. Feature of Size (FOS) and Size Tolerance

8. Maximum/Least Material Condition  (MMC and LMC)

9. Position Tolerance and Linear Tolerance

10. Position tolerance with MMC Modifier

11. Position tolerance with LMC Modifier

12. Virtual Condition Boundary(VC)

13. Envelope Requirements (Rule#1)

14. Quiz #1

15. Quiz #1 Answer


Chapter 2

Form Tolerance

16. Flatness

17. Straightness

18. Circularity

19. Cylindricity

20. Quiz #2

21. Quiz #2 and answer


Chapter 3

Datum and Datum System

22. Datum Reference Frame and Degree of Freedom

23. How to specify datum

24. Datum Target

25. Datum with MMB-LMB (Datum Shift)

26. Simultaneous Requirements  and Separate Requirements

27. Quiz #3

28. Quiz #3 and answer


Chapter 4

Orientation Tolerance

29. Parallelism

30. Perpendicularity

31. Angularity

32. Quiz #4

33. Quiz #4 and answer


Chapter 5

Position Tolerance

34. Tolerance of Position(TOP)¿Î

35. Position without Datum

36. Composite Tolerance

37. Quiz #5

38. Quiz #5 and answer


Chapter 6

Coaxiality, Concentricity & Symmetry

39. Coaxiality

40. Concentricity (ASME Y14.5-2018 deleted)

41. Symmetry (ASME Y14.5-2018 deleted)

42. Quiz #6

43. Quiz #6 and answer


Chapter 7 Runout Tolerance

44. Circular Runout

45. Total Runout

46. Quiz #7

47. Quiz #7 and answer


Chapter 8

Profile Tolerance

48. Profile tolerance

49. Profile tolerance (Unequal Profile with U Circle and UZ)

50. Quiz #8

51. Quiz #8 and answer


Summary

52. Final Review


Final Test

53. Final Test (1 hour)

54. Final Test Answer


Welcome to GD&T journey from Rookies to Stars.

54 training modules on GD&T based on ASME Y14.5-2018 and ISO GPS

Url: View Details

What you will learn
  • This course focuses the fundamental key content and requirements of ASME Y14.5-2018 and ISO GPS standards, such as ISO1101, ISO8015, etc. The whole training consists 60 modules covers size, form, orientation, position tolerance, datum, datum system, MMC/LMC applications, bonus tolerance, datum shift and composite tolerance, etc, it also touches the knowledge on geometric tolerance inspection, calculation and gage design

Rating: 4.05556

Level: All Levels

Duration: 11.5 hours

Instructor: Michael XU


Courses By:   0-9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 

About US

The display of third-party trademarks and trade names on this site does not necessarily indicate any affiliation or endorsement of hugecourses.com.


© 2021 hugecourses.com. All rights reserved.
View Sitemap