Modern Physics : Semiconductor - Electronics Devices

Modern Physics : Semiconductor - Electronics Devices

Semiconductor Electronics: Materials, Devices and Simple Circuits

• Energy bands in conductors, semiconductors and insulators (qualitative ideas only)

• Semiconductor diode - I-V characteristics in forward and reverse bias, diode as a rectifier

• Special purpose p-n junction diodes: LED, photodiode, solar cell and Zener diode and their characteristics, zener diode as a voltage regulator

• Junction transistor, transistor action, characteristics of a transistor and transistor as an amplifier (common emitter configuration), basic idea of analog and digital signals, Logic gates (OR, AND, NOT, NAND and NOR).

SUMMARY

1. Semiconductors are the basic materials used in the present solid state electronic devices like diode, transistor, ICs, etc.

2. Lattice structure and the atomic structure of constituent elements decide whether a particular material will be insulator, metal or semiconductor.

3. Semiconductors are elemental (Si, Ge) as well as compound (GaAs, CdS, etc.).

4. Pure semiconductors are called ‘intrinsic semiconductors’. The presence of charge carriers (electrons and holes) is an ‘intrinsic’ property of the material and these are obtained as a result of thermal excitation. The number of electrons (ne ) is equal to the number of holes (nh ) in intrinsic conductors. Holes are essentially electron vacancies with an effective positive charge.

5. The number of charge carriers can be changed by ‘doping’ of a suitable impurity in pure semiconductors. Such semiconductors are known as extrinsic semiconductors. These are of two types (n-type and p-type).

6. In n-type semiconductors, ne >> nh while in p-type semiconductors nh >> ne . 8. n-type semiconducting Si or Ge is obtained by doping with pentavalent atoms (donors) like As, Sb, P, etc., while p-type Si or Ge can be obtained by doping with trivalent atom (acceptors) like B, Al, In etc.

7. There are two distinct band of energies (called valence band and conduction band) in which the electrons in a material lie. Valence band energies are low as compared to conduction band energies. All energy levels in the valence band are filled while energy levels in the conduction band may be fully empty or partially filled. The electrons in the conduction band are free to move in a solid and are responsible for the conductivity. The extent of conductivity depends upon the energy gap (Eg ) between the top of valence band (EV ) and the bottom of the conduction band EC . The electrons from valence band can be excited by heat, light or electrical energy to the conduction band and thus, produce a change in the current flowing in a semiconductor.

8. For insulators Eg > 3 eV, for semiconductors Eg is 0.2 eV to 3 eV, while for metals Eg ≈ 0.

9. p-n junction is the ‘key’ to all semiconductor devices. When such a junction is made, a ‘depletion layer’ is formed consisting of immobile ion-cores devoid of their electrons or holes. This is responsible for a junction potential barrier.

10. By changing the external applied voltage, junction barriers can be changed. In forward bias (n-side is connected to negative terminal of the battery and p-side is connected to the positive), the barrier is decreased while the barrier increases in reverse bias. Hence, forward bias current is more (mA) while it is very small (µA) in a p-n junction diode.

11. Diodes can be used for rectifying an ac voltage (restricting the ac voltage to one direction). With the help of a capacitor or a suitable filter, a dc voltage can be obtained. 15. There are some special purpose diodes.

12. Zener diode is one such special purpose diode. In reverse bias, after a certain voltage, the current suddenly increases (breakdown voltage) in a Zener diode. This property has been used to obtain voltage regulation.

13. p-n junctions have also been used to obtain many photonic or optoelectronic devices where one of the participating entity is ‘photon’: (a) Photodiodes in which photon excitation results in a change of reverse saturation current which helps us to measure light intensity; (b) Solar cells which convert photon energy into electricity; (c) Light Emitting Diode and Diode Laser in which electron excitation by a bias voltage results in the generation of light.

14. Transistor is an n-p-n or p-n-p junction device. The central block (thin and lightly doped) is called ‘Base’ while the other electrodes are ‘Emitter’ and ‘Collectors’. The emitter-base junction is forward biased while collector-base junction is reverse biased.

15. Transistor can be used as an amplifier and oscillator. In fact, an oscillator can also be considered as a self-sustained amplifier in which a part of output is fed-back to the input in the same phase (positive feed back).

16. When the transistor is used in the cutoff or saturation state, it acts as a switch.

17. There are some special circuits which handle the digital data consisting of 0 and 1 levels. This forms the subject of Digital Electronics.

18. The important digital circuits performing special logic operations are called logic gates. These are: OR, AND, NOT, NAND, and NOR gates.

19. In modern day circuit, many logical gates or circuits are integrated in one single ‘Chip’. These are known as Intgrated circuits (IC).

IIT-JEE Main & Advanced | BITSAT | SAT | MSAT | MCAT | State Board | CBSE | ICSE | IGCSE

Url: View Details

What you will learn

• Introduction
• Classification of Metals, Conductors & Semiconductors
• Intrinsic semiconductor

Rating: 4.5

Level: Intermediate Level

Duration: 4.5 hours

Instructor: studi live